Disadvantages of tariffs

Дата добавления: 2015-08-29; просмотров: 537

Developing as it did for feedback amplifier design, classical control theory was naturally couched in the frequency domain and the s-plane. Relying on transform methods, it is primarily applicable for linear time-invariant systems, though some extensions to nonlinear systems were made using, for instance, the describing function.

The system description needed for controls design using the methods of Nyquist and Bode is the magnitude and phase of the frequency response. This is advantageous since the frequency response can be experimentally measured. The transfer function can then be computed. For root locus design, the transfer function is needed. The block diagram is heavily used to determine transfer functions of composite systems. An exact description of the internal system dynamics is not needed for classical design; that is, only the input/output behavior of the system is of importance.

The design may be carried out by hand using graphical techniques. These methods impart a great deal of intuition and afford the control designer with a range of design possibilities, so that the resulting control systems are not unique. The design process is an engineering art.

A real system has disturbances and measurement noise, and may not be described exactly by the mathematical model the engineer is using for design. Classical theory is natural for designing control systems that are robust to such disorders, yielding good closed-loop performance in spite of them. Robust design is carried out using notions like the gain and phase margin.

Simple compensators like proportional-integral-derivative (PID), lead-lag, or washout circuits are generally used in the control structure. The effects of such circuits on the Nyquist, Bode, and root locus plots are easy to understand, so that a suitable compensator structure can be selected. Once designed, the compensator can be easily tuned on line.

A fundamental concept in classical control is the ability to describe closed-loop properties in terms of open-loop properties, which are known or easy to measure. For instance, the Nyquist, Bode, and root locus plots are in terms of the open-loop transfer function. Again, the closed-loop disturbance rejection properties and steady-state error can be described in terms of the return difference and sensitivity.

Classical control theory is difficult to apply in multi-input/multi-output (MIMO), or multi-loop systems. Due to the interaction of the control loops in a multivariable system, each single-input/single-output (SISO) transfer function can have acceptable properties in terms of step response and robustness, but the coordinated control motion of the system can fail to be acceptable.

Thus, classical MIMO or multiloop design requires painstaking effort using the approach of closing one loop at a time by graphical techniques. A root locus, for instance, should be plotted for each gain element, taking into account the gains previously selected. This is a trial-and-error procedure that may require multiple iterations, and it does not guarantee good results, or even closed-loop stability.

The multivariable frequency-domain approaches developed by the British school during the 1970's, as well as quantitative feedback theory, overcome many of these limitations, providing an effective approach for the design of many MIMO systems. (3000)

(from F.L. Lewis. Applied Optimal Control and Estimation)