Офисный макияж
1st place – Tanker 2nd place - Pipeline Crude oil tankers are used to transport crude oil from fields in the Middle East, North Sea, Africa, and Latin America to refineries around the world. Product tankers carry refined products from refineries to terminals. Tankers range in size from the small vessels used to transport refined products to huge crude carriers. Tanker sizes are expressed in terms of deadweight (dwt) or cargo tons. The smallest tankers are General Purpose which range from 10 to 25,000 tons. These tankers are used to transport refined products. The Large Range and Very Large Crude Carriers (VLCC) are employed in international crude oil trade. The size of tanker that can be used in any trade (commercial voyage between a port of origin and destination) is dependent on the tanker's length and loaded depth and the size of the loading and unloading ports. Transporting oil over long distances is still done primarily by tanker, but compared to tankers, pipelines are a much safer means of transport, as marine mishaps demonstrate. Several pipelines are proposed to cross the Mediterranean Sea.
15. J lay pipeline
Overcoming some of the obstacles of S-lay installation, J-lay pipeline installation puts less stress on the pipeline by inserting the pipeline in an almost vertical position. Here, pipe is lifted via a tall tower on the boat, and inserted into the sea. Unlike the double curvature obtained in S-lay, the pipe only curves once in J-lay installation, taking on the shape of a "J" under the water. The reduced stress on the pipe allows J-lay to work in deeper water depths. Additionally, the J-lay pipeline can withstand more motion and underwater currents than pipe being installed in the S-lay fashion.
16. S-Lay pipeline
The reduced stress on the pipe allows J-lay to work in deeper water depths. Additionally, the J-lay pipeline can withstand more motion and underwater currents than pipe being installed in the S-lay fashion.
17. Transportation of gas. LNG –describe main features Liquefied natural gas or LNG is natural gas (predominantly methane, CH4) that has been converted to liquid form for ease of storage or transport. Liquefied natural gas takes up about 1/600th the volume of natural gas in the gaseous state. It is odorless, colorless, non-toxic and non-corrosive. Hazards include flammability, freezing and asphyxia. The natural gas fed into the LNG plant will be treated to remove water, hydrogen sulfide, carbon dioxide and other components that will freeze (e.g., benzene) under the low temperatures needed for storage or be destructive to the liquefaction facility. LNG typically contains more than 90% methane. It also contains small amounts of ethane, propane, butane, some heavier alkanes, and Nitrogen. The purification process can be designed to give almost 100% methane. One of the risks of LNG is a rapid phase transition explosion (RPT), which occurs when cold LNG comes into contact with water. LNG is transported in specially designed ships with double hulls protecting the cargo systems from damage or leaks. There are several special leak test methods available to test the integrity of an LNG vessel's membrane cargo tanks. The tankers cost around $200 million each. Transportation and supply is an important aspect of the gas business, since natural gas reserves are normally quite distant from consumer markets. Natural gas has far more volume than oil to transport, and most gas is transported by pipelines. There is a natural gas pipeline network in the former Soviet Union, Europe and North America. Natural gas is less dense, even at higher pressures. Natural gas will travel much faster than oil through a high-pressure pipeline, but can transmit only about a fifth of the amount of energy per day due to the lower density. Natural gas is usually liquefied to LNG at the end of the pipeline, prior to shipping. Short LNG pipelines for use in moving product from LNG vessels to onshore storage are available. Longer pipelines, which allow vessels to offload LNG at a greater distance from port facilities are under development. This requires pipe in pipe technology due to requirements for keeping the LNG cold. LNG is transported using both tanker truck, railway tanker, and purpose built ships known as LNG carriers. LNG will be sometimes taken to cryogenic temperatures to increase the tanker capacity. The first commercial ship-to-ship transfer (STS) transfers were undertaken in February 2007 at the Flotta facility in Scapa Flow with 132,000 m³ of LNG being passed between the vessels Excalibur and Excelsior. Transfers have also been carried out by Exmar Shipmanagement, the Belgian gas tanker owner in the Gulf of Mexico, which involved the transfer of LNG from a conventional LNG carrier to an LNG regasification vessel (LNGRV). Prior to this commercial exercise LNG had only ever been transferred between ships on a handful of occasions as a necessity following an incident.
The efficient and effective movement of natural gas from producing regions to consumption regions requires an extensive and elaborate transportation system. In many instances, natural gas produced from a particular well will have to travel a great distance to reach its point of use. The transportation system for natural gas consists of a complex network of pipelines, designed to quickly and efficiently transport natural gas from its origin, to areas of high natural gas demand. There are three major types of pipelines along the transportation route: the gathering system, the interstate pipeline system, and the distribution system. The gathering system consists of low pressure, small diameter pipelines that transport raw natural gas from the wellhead to the processing plant. Should natural gas from a particular well have high sulfur and carbon dioxide contents (sour gas), a specialized sour gas gathering pipe must be installed. Sour gas is corrosive, thus its transportation from the wellhead to the sweetening plant must be done carefully. Pipelines can be characterized as interstate or intrastate. Interstate pipelines are similar to in the interstate highway system: they carry natural gas across state boundaries, in some cases clear across the country. Intrastate pipelines, on the other hand, transport natural gas within a particular state. This section will cover only the fundamentals of interstate natural gas pipelines, however the technical and operational details discussed are essentially the same for intrastate pipelines.
18. Name top market leaders in the LNG market In 1970, Global LNG trade was of 3 billion cubic metres. In 2011, it was 331bcm. By the end of 2007 there were 15 LNG exporting countries and 17 LNG importing countries. The three biggest LNG exporters in 2007 were Qatar (28 MT), Malaysia (22 MT) and Indonesia (20 MT) and the three biggest LNG importers in 2007 were Japan (65 MT), South Korea (34 MT) and Spain (24 MT). LNG trade volumes increased from 140 MT in 2005 to 158 MT in 2006, 165 MT in 2007, 172[16] MT in 2008 and it is forecasted to be increased to about 200 MT in 2009 and about 300 MT in 2012. During next several years there would be significant increase in volume of LNG Trade and only within next three years; about 82 MTPA of new LNG supply will come to the market. For example just in 2009, about 59 MTPA of new LNG supply from 6 new plants comes to the market, including:
In 2006, Qatar became the world's biggest exporter of LNG,[17] As of 2012, 25% of the world's LNG exports are from Qatar.[17]
Офисный макияж
|
J-Lay Pipeline Installation
Overcoming some of the obstacles of S-lay installation, J-lay pipeline installation puts less stress on the pipeline by inserting the pipeline in an almost vertical position. Here, pipe is lifted via a tall tower on the boat, and inserted into the sea. Unlike the double curvature obtained in S-lay, the pipe only curves once in J-lay installation, taking on the shape of a "J" under the water.
